Our powder-based textured polyethylene is used to coat the tops and seats of most of Superior’s site amenities. One of the key advantages of textured polyethylene – besides its durability – is its ability to be easily repaired if damaged. Let’s walk through the repairing process.
How Long It Takes
It will take approximately 2 to 3 minutes to repair a small area that’s around 1” x 1” in
size. The larger or deeper the area, the longer it will take.
What Supplies You'll Need
Before you start, you'll need to gather the following items:
- pair of safety glasses
- dust mask
- hand torch or heat gun
- aluminum oxide 100-grit sandpaper or grinder
- a poly repair patch kit supplied by Superior (this kit comes with powder in a squirt bottle)
- Put on your mouth mask and glasses then smooth out the damaged area with sandpaper or a grinder.
- Use the torch or heat gun to slowly heat the surface to be repaired. While keeping the torch between 6 to 8 inches away from the surface, move the torch in a sweeping motion from side to side or up and down. Don't park the flame in one position too long. This method is used to prevent the base metal from reaching a high temperature, which will cause the powder to flow or burn.
- Squirt a small amount of powder onto the repair area then use the torch to apply more heat. Repeat this process until the repair area appears blended.
- When you think you’re done, stop and let the product cool for approximately 2 to 3 minutes. Once cooled, evaluate the area and determine if it needs more powder. If so, add more heat and powder then let cool to re-evaluate. Your product is now ready for use.
Watch Our Video
Want to see the steps for yourself? Take a look at our YouTube video.